Blog

4 Common Paint Problems and Their Solutions


Painting your house is one of the easiest ways to enhance to your interior décor. With DIY painting tutorial videos stashed all across the internet, painting seems real simple. However, the aftermath of a DIY paint project may not turn out to be what you expect. Sometimes, paint starts to peel, while in other cases, it begins to crack.

Here are some of the most common paint problems and their solutions.

1. Wrinkling

Wrinkling is one of the most common problems with paint. It happens when the topcoat of paint takes the form of wrinkled skin. It occurs because the top coat is either too thick or applied to a wet surface. Prolonged exposure to humidity and moisture also causes paint to wrinkle.

Solution

Before applying a fresh coat of paint, make sure that the previous coat is completely dry. Furthermore, while painting, make sure to distribute the paint evenly.

2. Cracking

Another common paint problem people often come across is cracking. Cracking takes place when dry paint film starts to crack, even if it is a coat. It usually happens because the previous coat of paint isn’t given the time to dry before the new coat is applied.

Solution

To eliminate cracking, one must scrap or sand the affected area, followed by applying a high-quality primer. After the primer has dried, the surface should then be painted with the best paint product.

3. Chalking

Chalking is the formation of a loose powdery material on top of the painted surface. It happens because low-quality paints with high pigment extenders are applied. Besides the quality of paint, age and wrong application also play a crucial part in chalking. Also, paints that are either too bright or contain a high amount of tint, which results in chalking. Lastly, an unnecessarily thin coat of paint leads to chalking.  

Solution

The loose paint must be scrapped away, followed by the application of a primer. The surface must be repainted using the best painting products at a distribution rate mentioned in the instruction manual.

4. Blistering

Blistering is when bubbles start to appear on the newly painted surface. It happens when the moisture underneath surface makes it to the top. It also happens when humidity is high, or the fresh coat of paint is applied to a damp surface. Inadequate surface preparation also results in blistering.

Solution

Try not to paint when humidity or the dew point is high. Before the paint is applied, make sure the surface is completely dry. If humidity is the problem, make sure that fans and vents are installed near the affected areas.  To maximize your chances of success, choose the right kind of primer.

Conclusion

These were just some of the numerous paint problems property owners are faced with. These problems occur due to any of the four reasons mentioned below:

·         High humidity

·         Insufficient surface preparation

·         Wrong methods of application

·         Substandard paints and primers

Speaking of substandard paints, never make the horrendous mistake of settling for low-quality paint products just to save a few bucks. Always choose the best paint products, like the ones we offer. For more information, feel free to visit our website, or call now at 718-338-7921.